Rockwell Automation 1746-HSRV SLC Servo Control Module User Manual User Manual
Page 89
Publication 1746-6.1.2 - July 2000
7-10 Setting Up Your SLC Servo Module
8. Select slot 1. The column line of slot 1 is highlighted.
9. In the Filter field in the Current Cards Available area, select
Interface. Part numbers and descriptions appear in the Current
Cards Available area.
10. Select 1746-HSRV Motion Control Module.
11. Press Enter. The part number and description of the SLC Servo
Module appears in the slot you selected.
7 slots
1746-A7 7-Slot Rack
0-6
10 slots
1746-A10 10-Slot Rack
0-9
13 slots
1746-A13 13-Slot Rack
0-12
IMPORTANT
Your SLC processor always appears in slot 0. The
remaining slots are available for assigning to other
hardware. Make sure the SLC Servo Module is in slot
1.
IMPORTANT
An alternative way to assign the SLC Servo Module is
to double-click on Other in the listing, type 10114 in
the Other Type I/O Card window, and select OK.
If your SLC
rack has:
In field
1 of the Racks
area, select:
These slots appear
below the
Racks area in
the # column: