Manually configuring the slc servo module – Rockwell Automation 1746-HSRV SLC Servo Control Module User Manual User Manual
Page 87
Advertising
Publication 1746-6.1.2 - July 2000
7-8 Setting Up Your SLC Servo Module
6. In the navigator window, double-click on I/O Configuration.
The I/O Configuration window appears. In the example below,
field 1 of the racks area contains a four slot rack.
7. To automatically configure your SLC Servo Module, select Read
I/O Config. The Read I/O Configuration From Online Processor
window appears showing the parameters of the read process.
8. Select Read I/O Config. The SLC processor reads the
configuration.
Manually Configuring the SLC Servo Module
To configure your SLC Servo Module in manual mode:
1. From the menu bar, select File. The File menu appears.
Advertising