BrightSign BrightAuthor User Guide v.4.1.1 - Manual (Page 37)

29 Chapter 2 – Setting up BrightSign Players
b. (Optional) Enable local web server: Check this box to enable the Local Web Server . You can include a
username and password in the text fields below for added security.
c. (Optional) USB Content Update Password: Enter a password in the field to enable password protection
for USB content updates . This feature helps to ensure that a player will not be assigned incorrect schedules
or data when updated via USB.
9. Under Logging, check any of the following boxes to enable/disable logs and specify upload settings:
a. Enable playback logging: Creates a log that records start and end times, zone names, media types, and
file names.
b. Enable event logging: Creates a log that records timestamps, state names, zone names, event types, and
event data.
c. Enable state logging: Creates a log that records current and last state names, timestamps, and media
types.
d. Enable diagnostic logging: Creates a log that records timestamps, firmware and script versions, and the
current presentation.
10. Use the RF Channel Scan Data (optional) field if you need to publish the same RF channel scan settings to
multiple XD1230 players. See Publishing Channel Scan Results for more details.
11. Use the Screen Color option to specify what screen color the player should display after it has successfully
completed the setup process. When the player displays this color, it is ready to receive content.
12. Create and install the setup files:
a. Click Create Setup Files.
b. Browse to and select an SD card (recommended) or USB flash drive to store the setup files.
Note: We recommend formatting your SD, SDHC, or SDXC card using FAT32. Formatting your card using NTFS
allows you to play media files that are 4GB or larger in size, but the player will not be able to receive network
updates or generate logs.
c. Turn off the BrightSign unit by unplugging the power adapter (or Ethernet cable if the player is being
powered by PoE).
d. Insert the card or flash drive into the unit.
e. Turn on the BrightSign unit by reconnecting the power.