Eneo iNEX Client - Manual (Page 102)

iNEX Standard
97
Chapter 11 — Streaming
Multiple users can monitor video from devices through the streaming server. When the streaming service is
not running, monitoring is still available, but it is restricted to fewer users based on the maximum number
of simultaneous connections supported by the device.
When you register more than one streaming service by buying additional WIBU-Keys, the iNEX program
distributes streaming workload to the several streaming servers by using the load balancing function, and
it increases monitoring stability. If one of the streaming servers stops operating for any system problem,
other streaming servers take that server’s place within the limit of the number of channels that can be streamed.
There is no difference in the way to monitor video whether or not the streaming service is running. Refer
to Chapter 5 — Live Video Monitoring (p. 51) for details about monitoring.
First, check the following and run the Setup program.
 Services should be running on the system. Refer to 3.1 Running Services (p. 19) for details.
 Devices should be added to a device group. Refer to Chapter 13 — Device Management (p. 107)
for details.
Select the Service menu, and then register a streaming service following the procedures below.
1. Click the button at the bottom. The Service Registration window appears, and a list of available
services is displayed with information about each service.