Eneo iNEX Client - Manual (Page 114)

iNEX Standard
109
− DVRNS: Allows you to enter the device name registered on a DVRNS server if the device uses
the DVR Name Service (DVRNS) function. Ensure the DVRNS server information on which the
device is registered is correct. If the DVRNS server information is not correct, the device will not
be found.
− Domain Name: Allows you to enter the device's domain name registered on a DNS server if the
device uses the domain name service.
 : Select the devices to register by checking the box beside each device name in the list. Selecting
the Select All box selects all devices in the list.
NOTES:

Depending on the model, the device may not be supported even though the iNEX program supports the
device's protocol. Ask your dealer or distributor about supported models.
 If the device uses the ONVIF TM Conformance protocol, you can select either the manufacturer (or iNEX
protocol) or the ONVIF
TM
Conformance protocol. However, it is possible that one or both of them are not
supported depending on the device model. Ask your dealer or distributor for details. Refer to the device
User’s Manual about enabling the ONVIF
TM Conformance protocol in the device, as procedures may differ
for each model.
2. Click the Add Devices button at the bottom.
 Name, Address, Device Type: Displays the name, IP address and type of the selected device. The
name will be updated automatically depending on the settings of the device.
 ID, Password: Enter the user ID and password which you set in the device in order to connect to that
device remotely. The connection to the device is allowed only to the users under the Administrator
group of the device, and recording is allowed only to the admin user under the Administrator group
of the device.
 Recording Service: Select a recording server from the list to record video from the selected device
(supported only for the network video devices). The device is registered on the recording server and
the recording server performs recording according to a recording schedule. It is recommended that
you do not change the recording server once any recording has been made. If you change the recording
server after some recording has been done, you cannot search or play back the video recorded on the
original recording server. The number in the recording server list indicates the maximum number of
cameras that can be registered, and the name indicates the name of a recording service, which was set
during the Service menu setup. The maximum number of cameras that can be registered differs depending
on the type and number of the WIBU-Keys connected to the administration server. When selecting
the Do not record option, the iNEX program treats the device as though it was not registered during
the Schedule setup and does not perform any of the scheduled activities associated with the device.
You can check the list of devices registered on the recording server on a Device Setup tab while setting
up the recording server in the Service menu. Refer to Chapter 15 — Storage Management (p. 125)
for details.