Eneo iNEX Client - Manual (Page 30)

iNEX Standard
25
 Streaming Service: Select whether or not to use the streaming service for monitoring video from the
device. If you use the streaming service, the iNEX program transmits video from the device to the client
system through the streaming server, and it allows multiple users to monitor video simultaneously. The
number of channels that can be streamed equals the number of channels that can be recorded unless
streaming WIBU-Keys have been added. When you register more than one streaming service by buying
additional WIBU-Keys, the iNEX program chooses any one of the streaming services depending on
the system load of the streaming server. Refer to Chapter 11 — Streaming (p. 97) for details.
 Apply to All Devices: Select to apply the same user ID and password to all selected devices if you
selected more than one device and the selected devises have the same user ID and password.
NOTES:

If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the
specifications and version of the DVR.
 When registering a four-channel network video transmitter which uses the iNEX protocol, all four cameras
are automatically registered even if some of the four cameras are disabled.
4. Click Device Group in the Site panel, and then the button at the bottom of the Site panel. The Add
Device Group window appears.
 Name: Enter the device group name.
 Location: Select an upper group to which the device group will belong.
 Select Devices Below, Selected Device List: Check the box beside cameras in the left panel, and
the selected cameras are added to the right panel.
Clicking the OK button completes the device group registration.
5. Check that the device was added to the device group correctly. Click Device Group in the Site panel
and then the arrow button ( ) beside Device Group. Clicking the registered group displays the list
of devices added to the device group and connection status in the Site List panel. If the connection was not
made properly, the network disconnection log is displayed (only for devices registered on the recording
service). Refer to Appendix – Network Disconnection Log (p. 151) for details about the network
disconnection log.