Eneo iNEX Client User Manual
Page 42
iNEX Standard
37
Device
The Device menu allows you to register and manage sites.
①
(Multiple Firmware Upgrade): Allows you to upgrade software for several devices at the same time.
Refer to 13.2 Managing Devices, Upgrading Device’s Software (p. 114) for details.
②
(Multiple Remote Setup): Allows you to change settings of several devices at the same time using a
setup file. Refer to 13.2 Managing Devices, Changing Device’s Setting Remotely (p. 114) for
details.
③
(Network Keyboard Setup): Allows you to add, remove and edit a network keyboard. You can
control the Client program with a network keyboard. Refer to Chapter 18 — Controlling With a
Network Keyboard (p. 143) for details.
④
Site Panel: Displays site group lists supported by the iNEX program.
⑤
Site List Panel: Displays the list and information about sites registered in each group. If the connection
was not working properly, the network disconnection log is displayed (only for devices registered on
the recording service). Refer to Appendix – Network Disconnection Log (p. 151) for details about
the network disconnection log. Clicking the arrow button (
) beside each device name displays the
status of video in, alarm in/out and audio in/out supported by the device (Record: During Time-Lapse
recording or Event-Based recording, Panic: During Instant recording, Idle: Ready to record).
⑥
(Incremental Search): Allows you to search for a device or site registered in each group.
Selecting a group in the Site panel and entering text that you want to search for causes the search results
to be displayed. Search results are displayed immediately as matching text is found within the selected
group. As you enter more text, the results narrow.