Eneo iNEX Client - Manual (Page 56)

iNEX Standard
51
Chapter 5 — Live Video Monitoring
You can monitor live video of each group. The Client system displays video from devices based on the
settings in the device on the Live screen. If the streaming service is running, the Client system displays video
transmitted through the streaming server, and it allows multiple users to monitor video simultaneously.
First, check the following and run the Client program.
 Services should be running in the system. Refer to 3.1 Running Services (p. 19) for details.
 Devices should be added to a device group. Refer to Chapter 13 — Device Management (p. 107)
for details.
5.1 Monitoring Video
Live video monitoring is supported in the Live panel (maximum 4). If the Live tab is not on the tab panel,
go to the System menu, click New Tab, and then Live.
Click the Live tab on the tab panel → Select a camera, device
or device group from the Site list, and drag and drop it on the
Live screen. Live video from each camera is displayed on the
screen. You can move a camera screen to the desired location
on the Live screen without disconnecting the current connection
while monitoring video. Select a camera screen and drag and
drop it on the desired location.
NOTE:
The Client system performance might seriously deteriorate when simultaneously monitoring or playing
back video with 1280x720 or higher resolution on more than one camera screen.
Panel Toolbar
The panel toolbar at the bottom allows you to control the Live panel.
 (Save to User Layout): Saves the current screen format.
 (Screen Format): Changes the screen format. Clicking the button
displays more available screen formats. Clicking the or button moves to the previous or next camera
groups.