Eneo iNEX Client User Manual
Page 124
iNEX Standard
119
Network Protocols
Network Protocols: Changes the port numbers
of the network protocols that are used in the
device (supported only for the protocols that are
used in the device).
NOTE:
When the HTTP server’s port number is
changed, the setup screen closes, and you should
change the HTTP port number in the iNEX Setup
program too. Refer to 13.2 Managing Devices,
Editing Device Information
(p. 112) for details.
WS-Discovery
Scope Parameters: Click the button and
add the scope parameters of WS-Discovery (Web
Services Discovery) protocol if necessary.
Discovery Mode: Sets whether or not to permit
discovery of the device. When Non-
Discoverable is selected, the Auto Scan function
is not supported for the devices which use the
ONVIF
TM
Conformance protocol during the
device registration.
User
You can add or delete a user. Clicking button
allows you to add a user.