Eneo iNEX Client - Manual (Page 123)

User’s Manual
118
TCP/IP
 IP Address Configuration: Sets up the device’s
IP address. Select the type of device’s network
configuration.
− Set Manually: Select when the device is using
a static IP address for network connection, and
set up LAN parameters manually.
− DHCP: Select when the device is networked
via DHCP (Dynamic Host Configuration
Protocol). Click the Apply button, and network
information is automatically assigned to the
device.
 DNS Configuration – Type: Enter the IP address of the DNS server. Select the type of DNS server’s
network configuration sets up the DNS server’s network information.
− Set Manually: Allows you to set up manually.
− DHCP: Assigns the information automatically. Clicking the Apply button applies the change, and the
changed information is displayed the next time it is connected. This will not be supported when the
device’s IP address is set to Set Manually.
DDNS
 Update Type: Updates the device’s IP address
information in the iNEX system automatically
when the device’s IP address is changed.
− No Update: Does not update the device’s IP
address information automatically.
− Device Update, DHCP Server Update:
Updates the IP address of the device or that is
registered on the DHCP server.
 Name: Sets up the DNS name.
 TTL (Time to Live): Sets up the interval that the
DHCP is to be updated.
Zero Configuration
 Enable Zero Configuration: Allocates an
appropriate IP address proper for the current
network condition automatically (supported only
for devices that provide the function).