Eneo iNEX Client User Manual
Page 57
User’s Manual
52
(Layout Sequence): Starts or stops layout sequence. Refer to 5.1 Monitoring Video, Layout
Sequence Monitoring (p. 55) for details.
(Hotspot): Sets up a selected camera screen as a hotspot screen. Refer to Hotspot Setup (p. 52) for
details.
(Event Spot): Sets up a selected camera screen as an event spot screen. Refer to Event Spot Setup
(p. 52) for details.
(Map Event Spot): Sets up a selected camera screen as a map event spot screen. Refer to Map Event
Spot Setup (p. 53) for details.
(Export/Print Image): Allows you to export or print the images currently displayed on the screen.
(Audio Broadcast): Broadcasts audio to all devices in the current Live tab.
Hotspot Setup
NOTE:
The “hotspot” in the iNEX program is a predefined camera screen in which video from any camera
among those currently displayed can be monitored with emphasis. The hotspot screen is surrounded by a
red outline.
1. Select a camera screen to set up as a hotspot screen on the current monitoring screen.
2. Click the (Hotspot) button on the toolbar at the bottom of the Live panel, and the current connection
in the selected camera screen is released. The hotspot screen is surrounded by a red outline.
3. Select any camera on the screen. Video from the selected camera is displayed on the hotspot screen, and
you can control the camera.
Event Spot Setup
NOTE:
The “event spot” in the iNEX program is a predefined camera screen in which video from a camera
which an event is detected among cameras currently displayed can be monitored with emphasis. The event
spot screen is surrounded by a blue outline.
1. Select a camera screen to set up as an event spot screen on the current monitoring screen.
2. Click the (Event Spot) button on the toolbar at the bottom of the Live panel, and the current connection
in the selected camera screen is released. The event spot screen is surrounded by a blue outline.
3. When an event is detected, video from the event-detected is displayed on the event spot screen.