Eneo iNEX Client - Manual (Page 28)

iNEX Standard
23
2. Click All Devices in the Site panel, and then the button at the bottom of the Site List panel. The
Device Scan window appears.
 Protocol: Select the protocol or manufacturer of the device to scan. Event related functions may
not be supported depending on the protocol that the device uses (supported for the iNEX protocol
and some versions of the Axis protocol), and some other functions may not be supported depending
on the settings of the device.
 Scan Mode: Select the scan mode. Clicking the Start Scan button displays the results in the list. If
the IP address range of the device is different from that of the administration server, the iNEX program
considers the IP address invalid. In this case, you must change the device’s IP address to register the
device.
− Auto Scan (LAN): Lists devices in a LAN environment (supported only for the network video devices).
If the device uses the
ONVIF TM Conformance protocol, this function is supported only when you have
checked the Disable WS-Discovery Windows Service (fdPHost, FDResPub) box during the
software installation in Microsoft
® Windows ® Vista or later operating systems. Also, if the device
uses the ONVIF TM Conformance protocol, it is recommended that the device not be networked via
DHCP (Dynamic Host Configuration Protocol). If the device is networked via DHCP, connection
to the device may not be made properly depending on changes in the external network environment.
− IP Address: Allows you to enter the IP address of a device. You can search more than one device
at a time by entering a range of IP addresses. It is recommended that the device not be networked
via DHCP (Dynamic Host Configuration Protocol). If the device is networked via DHCP, connection
to the device may not be made properly depending on changes in the external network environment.
− DVRNS: Allows you to enter the device name registered on a DVRNS server if the device uses the
DVR Name Service (DVRNS) function. Ensure the DVRNS server information on which the device
is registered is correct. If the DVRNS server information is not correct, the device will not be found.