Eneo iNEX Client - Manual (Page 72)

iNEX Standard
67
1. Select a recording service and click the button at the bottom. The Setup – Recording Service window
appears. Select the Device Setup tab.
The list of cameras registered on the current recording service is displayed. Clicking the Add button at
the bottom allows you to register additional cameras on the current recording service.
NOTES:

The number of devices that can be recorded in a recording server differs depending on the type and the
number of the WIBU-Keys connected to the administration server.
 If you remove a device for which some recording has been done and register the device again, the iNEX
system considers the device as a new device. In this case, you can search or play back video recorded
before the device was removed as follows: go to the Play panel
→ click the (Additional Menu) button
→ select Removed Devices.
2. Select the Storage Setup tab and click the Add button at the bottom.