Eneo iNEX Client - Manual (Page 91)

User’s Manual
86
Playing Self-Player File
You do not need to install any special software to play video exported as a self-player file because the self-
player file contains a player program (Clip Player). Double clicking the target file starts the Player program,
and video is displayed on the screen. Clicking the slide bar at the bottom of the Player program displays
the playback image of the selected time on the screen. Clicking the button exits the Player program.
NOTES:

It is suggested that the computer used for the Player program has at least an 800MHz Pentium III (Intel
Pentium Dual Core 2.2GHz recommended). If your CPU is slower than this, video clips recorded at maximum
speed with very high image quality will be played back slowly. Also DirectX 9.0 or higher is required to
install, and the VGA card with 16MB or higher video RAM is recommended for proper operation.
 Proper image display depends on the display settings of your PC. If you are experiencing display problems,
click the right mouse button on the background screen and select Properties → Settings then set the Color
quality
to “32 bit”. Then select Advanced → Troubleshoot, and then set the Hardware Acceleration to
“Full”. Please make sure that DirectX version 9.0 or higher has been installed if the display problem continues.
To check the version of DirectX, click Start → RUN and type “dxdiag” then hit the enter key which will display
DirectX Diagnostic Tool dialog box. Then move to the Display tab and make sure DirectDraw Acceleration
is set to “Enabled”. Test DirectDraw by selecting the DirectDraw Test button when using the Microsoft
®
Windows ® XP operating system. Please check the driver version of the video card and update it to the
latest version available. If you still have display problems after changing all display settings as described
above, try replacing the video card. Video cards with an ATI chipset are recommended.
 If you selected the Exclude Player option when saving recorded video, you must run the Self-Player
program (ClipPlayer.exe) which is provided in the iNEX installation folder (\Client\selfplayer) to play the
saved file.

: Goes to the beginning of the video.
: Goes to the end of the video.
: Plays the video in fast reverse. : Plays the video in fast forward.
: Goes backward one frame of the video. : Goes forward one frame of the video.
: Plays the video at regular speed.
 : Shows the previous camera group if there is recorded video in the previous camera group based on
the current screen format.
 : Cycles through the screen formats. It cycles through 2x2, 1+7, 3x3, 4x4, 4x5, 5x5 and 1+32.
 : Shows the next camera group if there is recorded video in the next camera group based on the current
screen format.
 : Sets up the properties of the player program.