Eneo iNEX Client User Manual
Page 117
User’s Manual
112
Editing Device Information
Select Edit Device from the device menu.
Information
It allows you to change information for connection to
the device.
Name: Edit the device name. You can use the same
name for more than one device. By selecting the
Disable Device option, the iNEX program no
longer considers the device registered in the
administration service. Selecting Device Name
Sync automatically updates the name based on the
settings in the device (supported only for devices
which use the iNEX protocol).
Address Type: Select device’s address type.
− Auto Scan (LAN): Allows you to enter the device’s
mDNS number when you edit the device’s address.
− IP Address: Allows you to enter the device’s IP
address when you edit the device’s address.
− DVRNS: If the device uses the DVRNS (DVR Name Service) function, this allows you to enter the
device name which is registered on the DVRNS server when you edit the device’s address. The name
should match the one set during the DVRNS setup in the device.
− Domain Name: If the device uses the domain name service, this allows you to enter the device’s
domain name registered on a DNS server when you edit the device’s address.
Address: Edit the device’s address based on the selected address type above.
Port: Edit the port numbers. The port numbers you enter should match the port numbers set in the device
for remote connection (Admin), remote monitoring (Watch), recording (Record) and two-way audio
communication (Audio).
ID, Password: Edit the user ID and password for connection to the device.
Connection Test: Click the button to test the connection to the device with the information entered
above.
Stream Protocol: Select the protocol for streaming (supported only for devices which use the
ONVIF
TM
Conformance
protocol).
Record Protocol: Select the protocol for recording (supported only for devices which use the
ONVIF
TM
Conformance
protocol).
ONVIF Profiles: Select a preset ONVI
FTM
profile (supported only for devices which use the
ONVIF
TM
Conformance
protocol). Refer to 13.3 Remote Setup of ONVIFTM Conformance Protocol Devices,
Profiles (p. 120) for details.