Eneo iNEX Client - Manual (Page 25)

User’s Manual
20
 Site Name: Select the administration service to connect to from the list. Select Local Host as the default
setting if the administration service is running in the current system. You can add other administration
services to the list or modify information about the administration service in the list by clicking the
button at the right.
−
Site Name, Service Address, Service Port: Designate the name
of the administration service and enter the IP address and port
number of the administration server (default: 11001).
 User ID, Password: Enter your user ID and password. The default user ID is admin and default password
is 12345678. You can change the user ID and password in the User menu. Refer to Chapter 14 —
User Management (p. 123) for details.
 Remember my ID on this computer: Check the box if you want to save your ID for logging on.
 Restore last Live sessions: Check the box if you want to restore the previous live monitoring sessions
in the current Live panels of the Client program (supported only for the Client program).
3.3 Registering Services
You must register recording, monitoring, streaming and video analytics services on the administration service
to start the iNEX program. Services that are installed on the administration server are registered on the
administration service automatically.
Go to the Start Menu → Click iNEX → Run the iNEX Setup program and enter login information.
Select the Service menu, and then register recording, monitoring, streaming and video analytics services
following the procedures below.