Eneo iNEX Client - Manual (Page 74)

iNEX Standard
69
6.2 Setting up Recording Schedule
Go to the Start Menu → Click iNEX → Run the iNEX Setup program → Select the Recording Schedule
menu, and set up the recording schedule following the procedures below.
NOTES:

The recording function is supported only for the device registered as the admin user.
 If the same device is registered on another recording service which is registered on another administration
service, only the first recording server that is connected to the device records video. Once a recording
service connects to the device, other recording servers will not record video from the device unless the
connection of the first recording service is released.
 The iNEX program performs recording with the settings of codec, resolution, frame rate and quality set
in the device if the device uses protocols other than iNEX or ONVIF TM Conformance.
 If the device uses the ONVIF TM Conformance protocol, the iNEX program performs recording with the
settings of the profile designated in the iNEX program among preset profiles. You can designate which
profile to use for recording when editing the device settings. Refer to 13.2 Managing Devices, Editing
Device Information
(p. 112) and 13.3 Remote Setup of ONVIF TM
Conformance Protocol Devices, Profiles
(p. 120) in Chapter 13 — Device Management for details.
 When the recording speed and resolution set in the iNEX program are higher than the Frame Rate and
Max. Resolution set on the device, the recording servers will record video at the Frame Rate and Max.
Resolution set on the device (four-channel network video transmitters only which use the iNEX protocol).
 If network connection is temporarily lost between the device and the recording server because of network
problems or recording server reboot, the device saves video temporarily while the network is down
(supported only for devices which use the iNEX protocol). When network connection is re-established,
the device transmits the saved video to the recording server at a time. In this case, video recording during
the period might be made with different settings from those in the recording schedule.
 Recording speed might be decreased depending on the network conditions or system performance.
 Recording might be delayed because of system congestion, and the recording OSD might be displayed
later or for longer than the scheduled time.
 Video playback might not be smooth during recording depending on the recording server’s system
performance.