Eneo iNEX Client - Manual (Page 137)

User’s Manual
132
− Event from any device: Select to notify events
when user-defined types of events are detected.
Click Event from any device, and the list of event
types is displayed in Event Types below → Select
the desired event types, and the selected event types
are added to the list under Event from any device
on the right.
− All Devices: Select to notify events when user-
defined types of events are detected from the selected
device or camera.
Click All Devices, and the list of registered devices
and cameras is displayed → Under All Devices,
click a device or camera to trigger event notification,
and the list of event types supported by the device
or camera is displayed in Event Types below →
Select the desired event types, and the selected event
types are added along with the selected device or
camera to the list under All Devices on the right.
− Device Group: Select to notify events when the
user-defined types of events are detected in the
selected device group.
Click Device Group, and the list of registered device
groups is displayed → Under Device Group, click
a device group to trigger event notification, and the
list of event types is displayed in Event Types below
→ Select the desired event types, and the selected
event types are added along with the selected device
group to the list under Device Group on the right.
3. Set up the event action by double clicking the Action schedule window and selecting a desired action type.
 Email Notification: Select to send an email to Client users when an event is detected based on the
event condition setting.
− Email Subject: Enter the email subject.
− Email Content: Enter the contents of the email. Clicking the
Insert Macro button displays a list of available macros.
Selecting a macro from the list applies the macro when sending
an email.
For this to work properly, you should enter the SMTP server
information for sending email and enter the email address of the
user to be notified. Click the Email Setup button in the Schedule
Setup window to enter the SMTP server information as follows.
Refer to Chapter 14 — User Management (p. 123) for details
about entering the email address of the user to be notified.