Eneo iNEX Client - Manual (Page 112)

iNEX Standard
107
Chapter 13 — Device Management
You can edit or delete the device from a list. You can also connect to a device to change its settings or upgrade
its software remotely. Go to the Start Menu → Click iNEX → Run the iNEX Setup program and enter
login information → Select the Device menu.

All Devices: Displays devices registered in the administration service. If you delete a device from All
Devices, it will not be available to search and play back previously recorded data even if the device is
registered again (network video devices only). Refer to 13.1 Registering Devices (p. 108) for details
about registering devices.
 Device Group: Displays registered device groups. You can monitor or play back recorded video from
the cameras in device groups. You must register devices in the administration service and add the devices
to a device group to perform any operation. Refer to 13.1 Registering Devices (p. 108) for details
about registering device groups.
 Layout: Displays the registered layouts. You can monitor video from multiple cameras in a predefined
layout. Refer to 5.1 Monitoring Video, Layout Monitoring (p. 53) for details.
 Layout Sequence: Displays the registered layout sequences. You can monitor video from multiple
cameras sequentially in more than one predefined layout. Refer to 5.1 Monitoring Video, Layout
Sequence Monitoring (p. 55) for details.
 Camera Sequence: Displays the registered camera sequences. You can monitor video from multiple
cameras sequentially in the same camera screen. Refer to 5.1 Monitoring Video, Camera Sequence
Monitoring (p. 57) for details.
 Map: Displays the registered maps. You can monitor video from cameras, event detection and input/output
device’s status on a map. Refer to 5.2 Map Monitoring (p. 58) for details.