MITSUBISHI ELECTRIC QJ71C24N - Manual (Page 15)

A - 13 A - 13
(Related Manual-1) … Q Corresponding Serial Communication Module User's Manual (Application)
SH-080007-G
13 COMMUNICATING WITH ASCII CODE (ASCII-
BIN CONVERSION)
13.1 ASCII-BIN Conversion
13.2 Settings for ASCII-BIN Conversion
13.3 Performing ASCII-BIN Conversion for Data
Communicated via Non Procedure Protocol
13.4 Example of Data Communication Using the
Non Procedure Protocol
13.5 Performing ASCII-BIN Conversion for Data
Communicated Via the Bidirectional Protocol
13.6 Example of Data Communication Using the
Bidirectional Protocol
14 DATA COMMUNICATIONS USING EXTERNAL
DEVICE AND PLC CPU M : N
CONFIGURATION
14.1 Data Communications Precautions
14.2 External Devices Interlock Conditions
14.3 Examples of Procedure for Data
Communications with the PLC CPU
15 SWITCHING THE MODE AFTER STARTING
15.1 Mode Switching Operation and Contents
that can be Changed
15.2 Mode Switching Precautions
15.3 I/O Signals for Handshake with PLC CPU
and Buffer Memory
15.4 Switching the Mode from the PLC CPU
15.5 Switching the Mode from an External Device
16 USING COMMUNICATION DATA
MONITORING FUNCTION
16.1 Communication Data Monitoring Function
16.2 Communication Data Monitoring Function
Settings
16.3 Communication Data Monitoring Example
17 DEDICATED INSTRUCTIONS
17.1 Dedicated Instruction List
17.2 BUFRCVS Instruction
17.3 CSET Instruction (PLC CPU Monitoring
Register/Cancel)
17.4 CSET Instruction (Initial Settings)
17.5 GETE Instruction
17.6 PRR Instruction
17.7 PUTE Instruction
17.8 UINI Instruction