MITSUBISHI ELECTRIC QJ71C24N - Manual (Page 298)

App. - 4 App. - 4
MELSEC-Q
APPENDIX
(2) List of added setting items for GX Configurator-SC
The following table lists the setting items added to the GX Configurator-SC due to
a software version upgrade.
GX Configurator-SC
Software version
SW0D5C-QSCU-E
Screen
(System
setting/monitor)
Additional setting item
Version
2.06G
Version
2.00A
Version
1.10L 40E,
30D,
20C
10B,
00A
Reference
section
Accumulated count of unlock process normal completion
Accumulated count of unlock process abnormal
completion
Accumulated count of lock process based on circuit
disconnect
Callback permit accumulated count
Callback denial accumulated count
Auto (callback) connection permit accumulated count
Auto (callback) connection denial accumulated count
Modem function
monitor/test
Accumulated count of callback receive procedure cancel
Circuit disconnect wait time (PLC CPU watch use)
Remote password mismatch notification count
designation
Remote password mismatch notification accumulated
count designation
Auto modem initialization designation
Callback function designation
Callback denial notification accumulated count
designation
Modem
function
system
setting
Data No. for callback designation 1 to 10
Section
8.4.4
Section
8.6.2
Transmission
control and other
monitoring/tests
RS-232 control signal status CS (CTS)
RTS (RS) designation
DTR (ER) designation
Transmission control start free area
Transmission control end free area
Send/Recv data monitoring designation
Action for buffer full
Stop by Timer 0 error
Monitor buffer head address
Monitor buffer size
Transmission
control and
other system
settings
Transmission transparent code designation (2nd to 10th)
Section
8.4.5
Section
8.6.3
User frame receive format designation (1st to 4th)
Exclusive format-1 received data count (1st to 4th) Non procedure
system setting
Non procedure
monitor/test
Timeout at No-protocol
Section
8.4.7
Section
8.6.5
Station. No. (Instruction setting)
Section
8.6.9
Monitor/test others
Communication error clear request for CH and to turn
LED off
Section
8.6.9
Section
8.6.10
Accumulated count of unlock process normal completion
Accumulated count of unlock process normal completion
Auto refresh
setting
Accumulated count of lock process based on circuit
disconnect
Section
4.6
: Setting possible : Setting impossible
POINT
(1) GX Configurator-SC SW0D5C-QSCU-E 20C or later supports the Q series
C24 of function version B.
(2) See Section 2.6 of this manual for how to check the software version of GX
Configurator-SC.