MITSUBISHI ELECTRIC QJ71C24N - Manual (Page 187)

8 - 8 8 - 8
MELSEC-Q
8 UTILITY PACKAGE (GX Configurator-SC)
REMARK
The following diagram illustrates the overview of a procedure in which the GX
Configurator-SC is used to change the system setting values of the Q series C24
and save the new values to a file or write them to the Q series C24's flash ROM.
Close the [Flash ROM setting] screen.
Close
I — ¹
Start the [Flash ROM setting]
screen.
Display the system setting sub-screen
for changing the setting values.
Click on each of the setting items
corresponding to the setting values
you wish to change. For each item,
enter or select the new setting value
in the [Setting value] field.
In the [Flash ROM setting] screen,
Start
Select in the [Flash ROM setting] screen.
See Section 8.4.
[Intelligent function module select
parameter setting module] screen
See Section 8.3.1
Change the setting values in the corresponding
system setting sub-screens.
See Sections 8.4.1 through 8.4.10.
This operation is allowed only in the [Flash ROM
setting] screen.
See Section 8.3.3.
Go to 1) setting via online operation
Read the data from the file.
File read
YES (offline operation)
NO
YES
End
YES
NO
Do you wish to
change the setting values via
offline operation?
click on the File save button. Then,
NO
Is the original data
saved in a file?
Have you
changed all the applicable
setting values?
in the file designation dialog box,
designate the file name under which
the data will be saved. All of the new
setting values will be saved in the file.
1 1 Save the new system setting values in a file
for backup.