MITSUBISHI ELECTRIC QJ71C24N - Manual (Page 324)

App. - 30 App. - 30
MELSEC-Q
APPENDIX
Appendix 8 Example of Clear Process Program for Receive Data
When performing data communications with non procedure protocol, use the receive
data clear request shown in 6.1.4. and display the sequence program example if
clearing the receive data from external device. (If the Q series C24 input/output signal
is X/Y000 to X/Y01F.)
The following I/O signals (X) and internal relays (M) are used in the program.