Panasonic MN103001G/F01K - Manual (Page 104)

Operating Mode
5-2
5.1 Overview
The 32-bit microcontroller has the following three operating modes. Oscillator start/stop and CPU and peripheral
circuit start/stop switching control functions are provided to support low power consumption.
Operating modes
1. Reset mode (RESET)
2. Normal operation mode (NORMAL)
3. Low power mode
Stop mode (STOP)
Halt mode (HALT)
Sleep mode (SLEEP)
Fig. 5-1-1 Operating Mode Transition Diagram
(Notes)
• All modes are entered to normal operating mode by resetting the system.
• Changing the mode by program is performed by setting the CPUM register.
Interrupt
Stop mode
(CPU and peripheral stopped)
Sleep mode
(CPU stopped, peripheral operating)
Halt mode
(CPU and peripheral stopped)
: Both the CPU and peripheral circuits operating.
: Both the CPU and peripheral circuits stopped.
: CPU stopped but peripheral circuits operating.
: Oscillation stabilization wait inserted.
Program
Interrupt
Program
Interrupt
Program
Oscillating stopped
Oscillating
Oscillating
STOP SLEEP
HALT
NORMAL
RESET
Release reset
Oscillating