Panasonic MN103001G/F01K - Manual (Page 340)

Serial Interface
13-38
13.4.3 Description of Registers for the UART Serial Interface
The UART serial interface includes the registers listed in Table 13-4-1. These registers are used for settings such
as clock source selection, parity bit selection, and protocol selection.
Table 13-4-1 List of UART Serial Interface Registers
Address Name Symbol Number of bits Initial value Access size
x'34000830 Serial 3 control register SC3CTR 16 x'0000 8, 16
x'34000834 Serial 3 interrupt mode register SC3ICR 8 x'00 8
x'34000838 Serial 3 transmission buffer SC3TXB 8 x'00 8
x'34000839 Serial 3 reception buffer SC3RXB 8 x'00 8
x'3400083C Serial 3 status register SC3STR 8 x'00 8
x'3400083D Serial 3 timer register SC3TIM 8 x'00 8