Panasonic MN103001G/F01K - Manual (Page 202)

Interrupt Controller
9-14
Group 6 interrupt control register
Register symbol: G6ICR
Address: x'34000118
Purpose: This register is used to enable group 6 interrupts, and to confirm interrupt requests and detection.
Bit No. 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit - G6 G6 G6 - T13 T12 T11 - T13 T12 T11 - T13 T12 T11
name LV2 LV1 LV0 IE IE IE IR IR IR ID ID ID
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Access R R/W R/W R/W R R/W R/W R/W R R/W R/W R/W R R/W R/W R/W
Bit No. Bit name Description
0 T11ID Timer 11 underflow interrupt detection flag
0: No interrupt detected 1: Interrupt detected
1 T12ID Timer 12 underflow interrupt detection flag
0: No interrupt detected 1: Interrupt detected
2 T13ID Timer 13 underflow interrupt detection flag
0: No interrupt detected 1: Interrupt detected
3 — "0" is returned when this bit is read.
4 T11IR Timer 11 underflow interrupt request flag
0: No interrupt request 1: Interrupt request
5 T12IR Timer 12 underflow interrupt request flag
0: No interrupt request 1: Interrupt request
6 T13IR Timer 13 underflow interrupt request flag
0: No interrupt request 1: Interrupt request
7 — "0" is returned when this bit is read.
8 T11IE Timer 11 underflow interrupt enable flag
0: Disabled 1: Enabled
9 T12IE Timer 12 underflow interrupt enable flag
0: Disabled 1: Enabled
10 T13IE Timer 13 underflow interrupt enable flag
0: Disabled 1: Enabled
11 — "0" is returned when this bit is read.
12 G6LV0 Group 6 interrupt priority level register (LSB)
13 G6LV1 Group 6 interrupt priority level register
14 G6LV2 Group 6 interrupt priority level register (MSB)
Set a level from 6 to 0.
15 — "0" is returned when this bit is read.