Rainbow Electronics MG260 - Manual (Page 104)

FLYFOT-MG260-MODULE
Page: 104 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
11 Specific AT commands
11.1 Abort command +WAC
15.13.1 Description
This specific command allows SMS, SS and PLMN selection related commands to be aborted.
Syntax
Command syntax: AT+WAC
Command Syntax Return
AT+WAC
AT+WAC=? OK
AT+WAC? OK
Example:
Command Possible responses
AT+COPS=?
Note : Available PLMN
Note : Available PLMN
AT+WAC
Note : Abort the request of PLMN list OK
Note : PLMN list request aborted
Defined values:
No parameter
11.2 Priority of AT commands
List of High priority at command
AT＋WAC,
ATH,
ATH1,
ATA,
ATD,
AT＋CLCC,
AT＋CMGS,
Priority of at commands in above list is higher than the other at commands not in the list and the at
commands in the list have following priority sequence: ＋WAC > ATH > ATH1 >ATA >ATD > +CLCC
> CMGS.