Rainbow Electronics MG260 User Manual
Page 187
FLYFOT-MG260-MODULE
Page: 187 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
2: FR, HR with HR preferred
3: HR, FR with FR preferred
4: EFR,HR with HR preferred
5: HR,EFR with EFR preferred.
18.16 Data Rate +WDR
Description :
This specific command allows the data rate for bearer data to be configured (available for outgoing
calls only).
Syntax :
Command syntax : AT+WDR=<n>
Command Syntax
Return
AT+WDR=<n>
OK
AT+WDR=?
+WDR: (0-2)
Note : If Half Rate available.
AT+WDR=?
+WDR: (0)
Note : If Half Rate not available.
AT+WDR?
+WDR: <n>
Command
Possible responses
AT+WDR=1
OK
Note : Configure voice type FR,HR with HR
Note : Bearer is configured
prefered.
AT+WDR=3
+CME ERROR: 3
Syntax error
Note :
AT+WDR?
+WDR: 1
Note : Ask the current value
OK
Note
:
Defined values :
<n>: Data coding type.
0: FR
1: FR, HR with HR preferred
2: HR, FR with FR preferred