Rainbow Electronics MG260 - Manual (Page 196)

FLYFOT-MG260-MODULE
Page: 196 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Syntax
Command syntax : AT+CPHS=<Mode>,<FctId>[,<precision>]
Command Possible responses
AT+CPHS=<Mode>,<FctId>[,<precision>] OK
AT+CPHS=<Mode>,<FctId>[,<precision>] +CME ERROR: 3
+CPHS: <FctId1>,<Status><CR<LF> +CPHS:
<FctId2>,<Status><CR<LF>
AT+CPHS? … +CPHS: <FctIdn>,<Status><CR<LF>
OK
AT+CPHS=? OK
Defined values:
<Mode>
0 : Deactivate a CPHS feature
1 : Activate a CPHS feature
2 : Interrogate a CPHS status
Note : The deactivate or activate command has not effect for Alternate line service, Network
Operator Name, CPHS information and Customer Profile Service features.
<FctId>
1 : Voice Mail Indicator
2 : Mail Box Number
3 : Alternate Line Service
4 : Diverted Call Indicator
5 : Network Operator Name
6 : CPHS Information
7 : Customer Service Profile
Note : The Customer Service Profile and Alternate Line Service features are activated if the field is set in
CPHS information and CSP files. The Network Operator Name is activated if at least one of the two
format names exist (Long or Short format).This is done at initialization.
<precision> :
only used if <Mode>=2and<FctId>= 5 to 7
if <FctId>=5, this field is <type format> (See +WNON)
if <FctId>=6, this field is <data field> (See +WCPI)