Rainbow Electronics MG260 - Manual (Page 72)

FLYFOT-MG260-MODULE
Page: 72 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
9.2 Select message service +CSMS
Description:
The supported services are originated (SMS-MO) and terminated short message (SMS-MT) +
Cell Broadcast Message (SMS-CB) services.
Syntax:
Command syntax : AT+CSMS=<service>
Command
Possible responses
AT+CSMS=0
Note : SMS AT command Phase 2 version 4.7.0 +CSMS: 1,1,1
OK
Note : SMS-MO, SMS-MT
AT+CSMS=1
Note : SMS AT command Phase 2 + +CMS ERROR: 303
Note : SMS-MO, SMS-M
AT+CSMS?
Note : Current values ?
+CSMS: 0,1,1,1
OK
Note : GSM 03.40 and 03.41 (SMS AT
command Phase 2 version 4.7.0
AT+CSMS=?
Note : Possible services +CSMS: (0,1)
OK
AT+CSMS +CMS ERROR: 3
Note: action command is not supported.
Defined values:
<service>
0: SMS AT commands are compatible with GSM 07.05 Phase 2 version 4.7.0.
1: SMS AT commands are compatible with GSM 07.05 Phase 2 + version.
9.3 Preferred Message Storage +CPMS
Description:
This command allows the message storage area to be selected (for reading, writing, etc).
At present MG260 only support “SM” storage.
Syntax:
Command syntax: AT+CPMS=<mem1>,[<mem2>]