Rainbow Electronics MG260 - Manual (Page 119)

FLYFOT-MG260-MODULE
Page: 119 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
No values.
It is possible to send a Terminal Response after the +STIN indication (step 2, cf§16.2), or after the +STGI
command (step 3).
Note :
For the SETUP MENU Proactive Command, it is only possible to send a
Terminal Response after the+STIN: 0 indication, not after a +STGI=0request.
All of the Terminal Responses are not possible with all of the Proactive
Commands. Compatibility between available Terminal Responses and Proactive
Commands is given in Appendix B, Table 2. If a Terminal Response is
attempted during a incompatible Proactive Command session, a +CME ERROR:
3 will be returned.
Possible error codes
+ CME ERROR: 3 Operation not allowed. This error is returned when a wrong parameter
is detected.
+CME ERROR: 4 Operation not supported. This error is returned when the user gives a
response with SIM ToolKit functionality not activated. Or if the SIM Toolkit
indication (+STIN) has not been received.
Example
Initially, all facilities are activated, the PIN is not required and the SIM toolkit functionality is activated.
+STIN: 0
The main menu has been sent from the SIM.
AT+STGI=0 Get information about the main menu
+STGI: 1,3,”BANK”,0 The main menu contains 3 items.
+STGI: 2,3,”QUIZ”,0
+STGI: 3,3,”WEATHER”,0
OK
AT+STGR=0,1,1
The item 2 of the main menu has been selected.
OK
+STIN: 6
The Sel item menu has been sent from the SIM.
AT+STGI=6 Get information about the BANK menu
+STGI: 1,”BANK” The BANK menu contains two items.
+STGI: 1,2,”PERSONAL ACCOUNT ENQUIRY”,1
+STGI: 2,2,”NEWS”,0
OK
AT+STGR=6,1,1
Select Item 1.
OK
+STIN: 3
User request to enter Password sent.
AT+STGI=3 Get information about this request.
+STGI: 0,0,4,4,0,”Enter Account Password:’
OK