Rainbow Electronics MG260 - Manual (Page 213)

FLYFOT-MG260-MODULE
Page: 213 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
z The AT command +WPCS affect the format of the Mailbox <name> entry.
<status>
When checked with “AT+CPHS=2,2”, it indicates if the number can be updated or not:
0 : Update is not possible
1 : Update is possible
18.40 FLYFOT Alternate Line Service: +WALS
Description
This specific command allows to set and to get the active line. The +CPHS command can be used to know
which line is activated.
Syntax
Command syntax AT+WALS = <CmdType>[,<LineId>]
Response syntax (to AT+CPHS=2,3)
+WALS = <LineId>
Command Possible responses
AT+WALS? +WALS: 1
OK
Note : Display the current active line
AT+WALS=? +WALS: (0-1),(1-2)
OK
AT+WALS = 0,1 +WALS: 1
Note : Activate Line 1 OK
AT+WALS = 0,2 +CME ERROR: 3
Note : Activate Line 2 Note : When the ALS feature is not
allowed
AT+WALS = 1 +WALS: 1
Note : Get the current activate Line Note : Display the current active line
AT+WALS = 1,2 +CME ERROR: 3
Note : Syntax error
AT+CPHS=0,3 OK
Note : Deactivation of ALS feature. Note : No effect.
AT+CPHS=2,3 Note : Interrogate of ALS Feature +WALS: 1 Note : Display the current active line
+CME ERROR: 3
Note : in the case where the ALS feature
is not allowed