Rainbow Electronics MG260 User Manual
Page 186
FLYFOT-MG260-MODULE
Page: 186 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Note : Reset the product at the end
OK
Note : reset completed, new software
running
Defined values :
No parameter
18.15 FLYFOT Voice Rate +WVR
Description :
This specific command allows the voice rate for bearer voice to be configured (available for outgoing
calls only).
Syntax :
Command syntax : AT+WVR=<n>
Command Syntax
Return
AT+WVR=?
+WVR: (0,2,3)
Note : Half Rate available.
AT+WVR=?
+WVR: (0,1)
Note : If EFR available.
AT+WVR=?
+WVR: (0)
Note : If HR and EFR not available
AT+WVR=?
+WVR: (0-5)
Note : If HR and EFR available
AT+WVR?
+WVR: <n>
Command
Possible responses
AT+WVR=1
OK
Note : Configure voice type FR and EFR
Note : Bearer is configured
AT+WVR=6
+CME ERROR: 3
Note : Syntax error
Syntax error
AT+WVR?
+WVR: 1
Note : Ask for the current value
OK
Defined values :
<n> : Voice coding type.
0: FR
1: FR and EFR