Rainbow Electronics MG260 - Manual (Page 194)

FLYFOT-MG260-MODULE
Page: 194 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Defined values
<mode>
0 : Display the table
1 : Edit the table
<table>
0 : Custom To GSM conversion table
1 : GSM To Custom conversion table
<char 1>, <char 2> : Character range to display/edit.
0-127 : for GSM To Custom conversion table
0-255 : for Custom To GSM conversion table
Note : If only <char 1> is provided, only this char is displayed/edited.
See section 19.2 for informative examples on phonebooks.
18.26 FLYFOT LoCK +WLCK
Description :
This specific command allows the ME to be locked on a specific network operator.
Note: Test SIM cards (with MCC=001 & MNC=01) doesn’t check these locks.
Syntax :
Command syntax: AT+WLCK=<fac>,<passwd>,<NetId>[,<GID1>[,GID2]]
[,<CnlType>[,<CnlData>]]
Response syntax: +WLCK: <status>
Command Possible responses
AT+WLCK="PN",12345678,20810 OK
Note : Activate network lock on SFR Note : Network lockactivated
(208,10)
AT+WLCK="PS",12345678,208105923568 OK
974 Note : SIM lock activated
Note : Activate SIM lock
AT+WLCK="PU",12345678,2081035 OK
Note : Activate Network Subset lock on Note : Network Subset lock activated
SFR (208, 10, 35).
AT+WLCK="PU",12345678,20810 +CME ERROR: 3
Note: Need 7 digits of IMSI to perform a
service provider lock