Rainbow Electronics MG260 - Manual (Page 193)

FLYFOT-MG260-MODULE
Page: 193 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Defined values :
No parameter
18.25 FLYFOT Custom Character Set +WCCS
Description :
This specific command allows to edit and display the custom character set tables. These tables are used
by the “CUSTOM” mode of +CSCS and the +WPCS commands. In this CUSTOM mode, when the user
enters a string, it is converted into GSM alphabet using the Custom To GSM table. In a similar way, when
the user requests a string display, the string is converted from GSM alphabet using the GSM To Custom
table.
In edition mode, the session is terminated by <ctrl-Z>, or aborted by <ESC>. Only hexadecimal
characters (‘0’…’9’, ‘A’…’F’) can be used. The number of characters entered must be equal to the edition
range requested, otherwise the command will return “+CME ERROR: 3”.
Syntax :
Command syntax : AT+WCCS=<mode>,<table>,<char 1>[,<char 2>]
Command Possible responses
AT+WCCS=0,0,120,130 +WCCS: 11,
Note : Display from character 120 to 78797A2020202020097E05
character 130 of the Custom To GSM OK
conversion table Note : 11characters displayed
AT+WCCS=1,0,115<CR> OK
20<ctrl-Z> Note : Edition successful
Note : Edit character 115 of the Custom To
GSM conversion table
AT+WCCS=1,1,0,4<CR> OK
40A324A5E8<ctrl-Z> Note : Edition successful
Note : Edit the 5 first characters of the
GSM To Custom conversion table
AT+WCCS=1,1,200 +CME ERROR: 3
Note : Edit character 200 of GSM To Note : Index out of range
Custom conversion table