Rainbow Electronics MG260 - Manual (Page 108)

FLYFOT-MG260-MODULE
Page: 108 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
12.3.1.1 Syntax
Command syntax :
+STSF=<mode>
Command Possible responses
+STSF=<Mode>
OK
+CME ERROR: <err>
+STSF?
+STSF: <Mode>, 5FFFFFFF7F,255
+STSF=?
+STSF:
(0-2),(160060C01F-5FFFFFFF7F),(1-255),(0-1)
OK
12.3.1.2 Defined values
<mode>
0: Deactivates the SIM Toolkit functionalities.
1: Activates the SIM Toolkit functionalities.
Error codes
+CME ERROR: 3 Operation not allowed. This error is returned when a wrong parameter is
entered.
12.4 SIM ToolKit Indication (+STIN)
12.4.1.1 Unsolicited result
In order to allow the customer application to identify the pro-active command sent via SIM ToolKit, a
mechanism of unsolicited SIM ToolKit indications (+STIN) is implemented.
Syntax : +STIN: <CmdType>
<CmdType>
0: a ‘Setup Menu’ pro-active command has been sent from the SIM.
1: a ‘Display Text’ pro-active command has been sent from the SIM.
2: a ‘Get Inkey’ pro-active command has been sent from the SIM.
3: a ‘Get Input’ pro-active command has been sent from the SIM.
4: a ‘Setup Call’ pro-active command has been sent from the SIM.
5: a ‘Play Tone’ pro-active command has been sent from the SIM. (*)
6: a ‘Sel Item’ pro-active command has been sent from the SIM.
7: a ‘Refresh’ pro-active command has been sent from the SIM. (*)
8: a ‘Send SS’ pro-active command has been sent from the SIM. (*)