Rainbow Electronics MG260 - Manual (Page 49)

FLYFOT-MG260-MODULE
Page: 49 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
6.5 Read operator name +COPN
Description :
This command returns the list of all operator names (in numeric and alphanumeric format)
stored in the module.
Syntax :
Command syntax : AT+COPN
Command response : +COPN: <NumOper>,<AlphaOper>
Command
Possible responses
AT+COPN
Note : Ask for preferred list of networks +COPN: 23201,"A1"
+COPN: 23203,"A max."
+COPN: 23207,"A tele.ring"
+COPN: 23205,"one"
…
OK
AT+COPN=? OK
Note: succeed
AT+COPN?
AT+COPN=1 +CME ERROR: 3
Note: not support
Defined values :
<NumOper> is the operator in numeric format.
<AlphaOper> is the operator in long alphanumeric format (see appendix 19.12 for operator names
description)
6.6 Get handover counter +THOC
Description :
This command returns the counter of the product spanning over BSIC.
Syntax :
Command syntax : AT+THOC
Command response : + THOC: <Handover Counter>
Command
Possible responses