Rainbow Electronics MG260 User Manual
Page 144
FLYFOT-MG260-MODULE
Page: 144 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Defined values:
<n> : range of auto-detectable speeds (bauds)
z
0
z
2400
z
4800
z
9600
z
19200
<m>: possible speeds that can be used by the DCE (bauds)
z
300
z
600
z
1200
z
38400
z
57600
z
115200
15.2 DTE-DCE character framing +ICF
Description :
This command is used to determine the local serial port start-stop (asynchronous)
character framing used by the DCE.
Syntax :
Command syntax: AT+ICF= <format>[, <parity>]
Command
Possible responses
AT+ICF?
Note :
+ICF: 3,4
OK
Note : Current values
AT+ICF=?
Note :
+ICF: 3,4
OK
Note : Possible values
AT+ICF=3,4
Note :
OK
Note : New values
AT+ICF=3
OK
Note : New values
Defined values:
<format>
0 : Autodetect (not supported)