Rainbow Electronics MG260 - Manual (Page 235)

FLYFOT-MG260-MODULE
Page: 235 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
19.3 Specific error result codes
<error> Meaning Resulting from the following commands
500
unknown error.
All commands
512 MM establishment failure (for SMS). +CMGS, +CMSS (+CMS ERROR: 512)
513 Lower layer failure (for SMS) +CMGS, +CMSS (+CMS ERROR: 513)
514 CP error (for SMS). +CMGS, +CMSS (+CMS ERROR: 514)
515 Please wait, init or command processing in
progress.
All commands ( “+CME ERROR: 515” ERROR: 515”) or “+CMS
517 SIM Toolkit facility not supported. +STGI
518 SIM Toolkit indication not received. +STGI
519 Reset the product to activate or change a new
echo cancellation algo.
+ECHO, +VIP
520 Automatic abort about get plmn list for an
incoming call.
+COPS=?
526 PIN deactivation forbidden with this SIM card. +CLCK
527 Please wait, RR or MM is busy. Retry your
selection later.
+COPS
528 Location update failure. Emergency calls only. +COPS
529 PLMN selection failure. Emergency calls only. +COPS
531 SMS not sent : the <da> is not in FDN
phonebook, and FDN lock is enabled. (for SMS)
+CMGS, +CMSS (+CMS ERROR: 531)
532 the embedded application is activated so the
objects flash are not erased
+WOPEN
533 Missing or Unknown APN ATD*99 +GACT +CGDATA
19.4 Failure Cause from GSM 04.08 recommendation (+CEER)
Cause value Diagnostic
1 Unassigned (unallocated) number
3 No route to destination
6 Channel unacceptable
8 Operator determined barring
16 Normal call clearing
17 User busy
18 No user responding
19 User alerting, no answer
21 Call rejected
22 Number changed