Rainbow Electronics MG260 User Manual
Page 208
FLYFOT-MG260-MODULE
Page: 208 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Response syntax +WFM: <FtrID>,<status>,<resetFlag>
Command
Possible responses
AT+WFM=2,”BI9001800”
+WFM: “BI9001800”,1,0
OK
Note : Dual-band mode 900/1800 is enabled
AT+WFM=1,11
+CME ERROR: 3
Note : Enable the Mono-band 900
Note : Band selection are not allowed
mode
with AT+WFM command
AT+WFM=0,61
+CME ERROR: 3
Note : <mode>=0 is not allowed on
<FtrID> values with2 digits
AT+WFM=0,”EFR”
OK
Note : Disable the Enhanced Full Rate
feature
Defined values
<mode>
0 : disable feature <FtrID>
1 : enable feature <FtrID>
2 : interrogate the status of the <FtrID> feature.
If the<FtrID>parameter is not used, the status of all the features are listed (with several +WFM
responses).
<FtrID>
Numeric value
String value
Meaning
11
"MONO900"
Mono-band mode 900 MHz (def. 0)
12
"MONO1800"
Mono-band mode 1800 MHz (def. 0)
13
"MONO1900"
Mono-band mode 1900 MHz (def. 0)
14
"BI9001800"
Dual-band mode 900/1800 MHz (def. 1)
15
"BI9001900"
Dual-band mode 900/1900 MHz (def. 0)
16
"MONO850"
Mono-band mode 850 MHz (def. 0)
17
"BI8501900"
Dual-band mode 850/1900 MHz (def. 0)
18
"QUADBAND"
Quad-band mode 850/900/1800/1900 MHz
2
"EFR":
Enhanced Full Rate feature (def. 1)
31
“NOHR_NOECHO”
HR and ECHO features are disabled
32
"HR"
Half Rate feature (def. 1)
33
"ECHO"
Echo Cancel (def. 0)
4
"DTXDATA"
Data with DTX feature (def. 1)
5
"DATA144"
Data 14.4 kbit/s feature (def. 1)
61
"SIM3VONLY"
3V SIM voltage mode (def. 0)