Rainbow Electronics MG260 - Manual (Page 11)

FLYFOT-MG260-MODULE
Page: 11 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged
without prior written agreement.
A call from a GSM mobile station to the PSTN is called a “mobile originated call” (MOC) or
“outgoing call”, and a call from a fixed network to a GSM mobile station is called a “mobile
terminated call” (MTC) or “incoming call”.
In this document, the word “product” refers to any FLYFOT product supporting the AT
commands interface.
1.4 Presentation rules
In the following, the AT commands are presented with as much precision as possible, through three
paragraphs. A “Description” paragraph provides general information on the AT command (or
response) behaviour. A “Syntax”paragraph describes the way to use it, the possible answers, through
a readable format. A “Defined values” paragraph provides parameters values, as well for the AT
command as for the corresponding responses.
Schemas are provided where necessary.