Rainbow Electronics MG260 - Manual (Page 65)

FLYFOT-MG260-MODULE
Page: 65 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
as an ASCII string
AT+CPBW=23,"02112345678",129,"804E095F20
"
Note : write location 23 (UCS2 format for the
<text> field) OK
Note: Location 23 is written
When the fixed dialing phonebook (FDN) is locked, this command is not allowed. Moreover, when the
FDN is unlocked, PIN2 is required to write in the FDN phonebook.
But if PIN2 authentication has been performed during the current session, the +CPBW command with
FDN is allowed.
Defined valuess :
<index> integer type value depending on the capacity of the phonebook memory.
<number> phone number in ASCII format.
<type> TON/NPI (Type of address byte in integer format).
Note:
for the <type> parameter, all values are allowed from 0 to 255,but the MSB will be set to 1 in all cases (ex :
a <type> value of 17 will be written as 145).
<text> string type.
Note 1:
For the <text> parameter all strings starting with “80”, “81” or “81” are considered in UCS2 format. See
the APPENDIX E (Coding of Alpha fields in the SIM for UCS2).
Note 2:
The +CSCS (Select Character set) command does not affect the format for phonebook entries.
8.5 Phonebook phone search +CPBP
Description :
This specific command orders the product to search the phonebook for an item with the same phone
number as that defined in the parameter.
Syntax :
Command syntax : AT+CPBP=<PhoneNumber>
Command
Possible responses
AT+CPBP=”+331290101”
Note : Search entries corresponding to this phone
number
+CPBP : 15,”+331290101”,145,”Eric”
OK
Note : Display the entry corresponding to the
specified phone number
AT+CPBP=”+331290101”
Note : Search entries corresponding to this phone
number +CPBP : 15,”01290101”,129,”Eric”
OK
Note : Display the entry corresponding to the