Rainbow Electronics MG260 - Manual (Page 212)

FLYFOT-MG260-MODULE
Page: 212 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Response syntax (to AT+CPHS=2,2)
+WMBN = <LineId>,<number>,<type>,<name>,<status>
Command Possible responses
AT+WMBN=? OK
AT+WMBN? OK
AT+CPHS=2,2 +WMBN: 1,"0123456789",129,”Maison”,1
Note : Get the current Mail Box +WMBN: 2,”9876543210”,129,”Travail”,1
Numbers in SIM +WMBN: 3,,,,1
+WMBN: 4,,,,1
OK
AT+WMBN=1,”+33122334455”,145 OK
Note : Set mailbox number for line1. Note : Mailbox number for Line1 is set.
AT+WMBN=2 OK
Note : Erase mailbox number & name
for line2
AT+CPHS=2,2 +WMBN: 1,"+33122334455",145,,1
Note : Get the current Mail Box +WMBN: 2,,,,1
Numbers again +WMBN: 3,,,,1
+WMBN: 4,,,,1
OK
Defined values
<LineId>
1 : Line 1
2 : Line 2
3 : Data
4 : Fax
<number> : Phone number in ASCII format.
<type> : TON/NPI
(Type of address byte in integer format).
<name> : name of mailbox.
Notes :
z For the<name> parameter all strings starting with “80”, “81” or “82” are considered in UCS2
format. See the APPENDIX E: Coding of Alpha fields in the SIM for UCS2. If a wrong UCS2
format is entered, the string is considered as an ASCII string.