Rainbow Electronics MG260 - Manual (Page 39)

FLYFOT-MG260-MODULE
Page: 39 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Command Possible responses
AT+CRMP=0,7,0,2
Note : Play voice call melody index 2 with
volume level 7.
OK
Note : Melody Playback.
AT+CRMP=0,,,0
Note : Stop the melody. OK
Note : The melody is stopped.
AT+CRMP=?
Note : supported parameters +CRMP: (0-2),(0-15),0,(0-10)
OK
Defined values :
<call type>
0 Incoming voice call
1 Incoming data call
2 Incoming fax call
<volume>
0 Min volume
…
6 Default volume
15 Max volume
<type>
0 Manufacturer Defined (default)
<index>
0 Stop Melody Playback
1-10 Melody ID for voice/data/fax call type (default : 1)
5.16 Ringer Sound Level +CRSL
Description :
This command is used to set/get the sound level of the ringer on incoming
calls. The set command changes the default <volume> value of the +CRMP
command.
Syntax :
Command syntax : AT+CRSL=<sound level>
Command
Possible responses
AT+CRSL=0
Note : Set volume to Min.
OK
Note : Current ring playing with Min.
volume.