Rainbow Electronics MG260 User Manual
Page 116
FLYFOT-MG260-MODULE
Page: 116 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
+STGI: 1,3,”BANK”,0
+STGI: 2,3,”QUIZ”,0
+STGI: 3,3,”WEATHER”,0
OK
AT+STIN?
+CME ERROR: 4
12.6 Unsolicited Result : SIM ToolKit Control Response (+STCR)
When the customer application makes an outgoing call or an outgoing SMS
and if the call control facility is activated, CALL CONTROL and SMS CONTROL
responses can be identified. This is also applicable to SS calls.
Syntax : +STCR: <Result>[,<Number>,<MODestAddr>,<TextInfo>]
Option :
<Result>
0: Control response not allowed.
1: Control response with modification.
<Number> Called number, Service Center Address or SS String in ASCII format.
<MODestAddr> MO destination address in ASCII format.
<TextInfo>
Text information in ASCII format.
12.7 SIM ToolKit Give Response (+STGR)
Description
This command allows the application/user to select an item in the main menu, or to answer the following
proactive commands:
z
GET INKEY Key pressed by the user.
z
GET INPUT Message entered by the user.
z
SELECT ITEM Selected item.
z
SETUP CALL User confirmation.
z
DISPLAY TEXT User confirmation to clear the message.
z
SETUP EVENT LIST Reporting events.
It is also possible to terminate the current proactive command session by sending a Terminal
Response to the SIM, with the following parameters:
z
BACKWARD MOVE Process a backward move
z
BEYOND CAPABILITIES Command beyond ME capabilities
z
UNABLE TO PROCESS ME is currently unable to process command
z
NO RESPONSE No response from the user
z
END SESSION User abort.