Rainbow Electronics MG260 - Manual (Page 89)

FLYFOT-MG260-MODULE
Page: 89 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Defined values
<Character Set>
“GSM” GSM default alphabet.
“HEX” Hexadecimal mode. No character set used ; the user can read or write hexadecimal values.
9.20 Select Cell Broadcast Message Types +CSCB
Description
This command selects which types of CBMs are to be received by the ME. It is allowed in both PDU and
text modes.
Syntax
Command syntax : AT+CSCB= <mode>, [ <mids>, [ <dcss> ] ]
Important note : Test read command (AT+CSCB ?) is not supported.
Command
Possible responses
AT+CSCB=0,.15-17,50,86.,..
Note : Accept SMS-CB types, 15,16,17,50
and 86 in any language OK
Note : CBMs can be received
+CBM : 10<CR><LF>
00112233445566778899
Note : CBM length of a received Cell
Broadcast message (SMS-CB), CBM bytes in
PDU mode)
AT+CSCB=1
Note : Deactivate the reception of CBMs OK
Note : CBM reception is completely stopped
Defined values
The <bm> parameter of +CNMI command controls the message indication. The activation of CBM
reception (<mode>=0) can select only specific Message Identifiers (list in <mids>) for specific Languages
(list in <dcss>), but the deactivation stops any reception of CBMs (only AT+CSCB=1 is allowed) Message
Identifiers (<mids> parameter) indicates to which type of message identifiers the ME should listen.
<dcss> : Supported languages
0 German
1 English
2 Italian
3 French
4 Spanish
5 Dutch
6 Swedish
7 Danish
8 Portuguese
9 Finnish