Rainbow Electronics MG260 - Manual (Page 41)

FLYFOT-MG260-MODULE
Page: 41 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
1 aux micro and earphone.
Note:
If exist call now, this command is not supported. In this case, return error 4(Not support).
5.18 Telephone firewall +TSFW
Description:
This specific command is used to set the telephone firewall.
Syntax:
Command syntax: AT+TSFW=m,<flag>,<telephone number>
Command Possible responses
AT+TSFW=3,0,331234,234534,12343
Note: Set rejected phone number
+TSFW: 3
OK
Note: 3 phone numbers have been added into
the phone firewall list
AT+TSFW =2,1,334234,34523
Note : Set acceptable phone number
+TSFW: 2
OK
Note: The flag is changed and old list should
be empty. Then 2 phone numbers have been
added into the new list
AT+ TSFW =2,1,234325,213423
Note: Set acceptable phone number
+TSFW: 4
OK
Note: The flag is the same as the last. 2 phone
numbers added into the list. The current list
has 4 recorders.
AT+TSFW =0
Note: Delete all recorders
+TSFW: 0
OK
Note: Delete successfully
AT+TSFW =?
Note: Get current the reorders’ number of the list
+TSFW: 4
OK
Note: Current reorders’ number