Rainbow Electronics MG260 - Manual (Page 23)

FLYFOT-MG260-MODULE
Page: 23 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged
without prior written agreement.
Defined values :
<date and time string>
String format for alarms : “yy/MM/dd,hh:mm:ss” (see +CCLK).
Note : Seconds are not taken into account.
4.18 Select type of address +CSTA
Description :
This command is used to select type of address.
Syntax :
Command syntax :AT+CSTA=<type>
Command
Possible responses
AT+CSTA?
+CSTA: 129
OK
Note : read current value
AT+CSTA=? +CSTA: (129,145)
OK
Note : get all value
AT+CSTA=129
OK
Note : set value
AT+CSTA +CME ERROR: 3
Note : not support
4.19 Open Micorphone power +TCFG
Description :
Firstly this command is used to open or close main microphone power by parameter “RED”.
Secondly this command is used to control display mode by parameter “IND”.
Syntax :
Command syntax : AT+TCFG=<type>,<value>
Command
Possible responses
AT+TCFG=”IND”,1
Note : enable the value of CSQ、CREG、CBC、
CGREG indication unsolicited
OK
AT+TCFG=?
Note : Get all value +TCFG: ("RED","NTC","IND"),(0,1)
OK
AT+TCFG?
AT+TCFG +CME ERROR: 3
Note : not support
Defined values :
<Type>
“RED”: record mode.