Rainbow Electronics MG260 - Manual (Page 92)

FLYFOT-MG260-MODULE
Page: 92 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
10 Supplementary Services commands
10.1 Call forwarding +CCFC
Description:
This commands allows control of the "call forwarding" supplementary service.
Syntax:
Command syntax:
AT+CCFC= <reason>, <mode> [, <number> [, <type> [, <class> [,<subaddr> [,<satype> [,<time> ] ] ] ] ] ]
Response syntax:
+CCFC: <status>, <class1> [, <number>, <type> [,<subaddr>,
<satype> [,<time> ] ] ] [ <CR><LF>+CCFC: <status>, <class2> [, <number>,
<type> [,<subaddr>, <satype> [,<time> ] ] ] [ … ] ]
Command
Possible responses
AT+CCFC = 0,3,"13051204317"
Note: Register to unconditional call forwarding OK
Note: Command valid
AT+CCFC =0,2
Note: Interrogate unconditional call forwarding +CCFC: 1,1,"+861062965555",129
OK
AT+CCFC =0,4
Note: Erase unconditional call forwarding OK
AT+CCFC =2,3,"+861064345558", , , , , 5
Note: Register no reply call forwarding after 5s OK
+CCFC responses are not sorted by <class> parameter, but only by the order of network response.
Defined values
<reason>
0 Unconditional
1 Mobile busy
2 No reply
3 Not reachable
4 All call forwarding
5 All conditional call forwarding
<mode>
0 Disable
1 Enable
2 Interrogate