Rainbow Electronics MG260 - Manual (Page 233)

FLYFOT-MG260-MODULE
Page: 233 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
19 Appendixes
19.1 ME error result code : +CME ERROR: <error>
<error> Meaning Resulting from the following commands
3 Operation not allowed All GSM 07.07 commands (+CME ERROR: 3)
4 Operation not supported All GSM 07.07 commands (+CME ERROR: 4)
5 PH-SIM PIN required (SIM lock) All GSM 07.07 commands (+CME ERROR: 5)
10 SIM not inserted All GSM 07.07 commands (+CME ERROR: 10)
11 SIM PIN required All GSM 07.07 commands (+CME ERROR: 11)
12 SIM PUK required All GSM 07.07 commands (+CME ERROR: 12)
13 SIM failure All GSM 07.07 commands (+CME ERROR: 13)
16 Incorrect password +CACM, +CAMM, +CPUC, +CLCK, +CPWD, +CPIN, +CPIN2
(+CME ERROR: 16)
17 SIM PIN2 required +CPBW (FDN), +CLCK (FDN),
18 SIM PUK2 required +CACM, +CAMM, +CPUC, +CPBW (FDN), +CPIN, +CPIN2,
+CLCK (FDN), +CPWD
20 Memory full +CPBW
21 Invalid index +CPBR, +CPBW, ATD>[mem]index, +WMGO
22 Not found
+CPBF, +CPBP, +CPBN, +CGSN, +WOPN, ATD>[mem]”name”
24 Text string too long +CPBW, +CPIN, +CPIN2, +CLCK, +CPWD
25 Invalid characters in password +CPINC
26 Dial string too long +CPBW, ATD, +CCFC
27 Invalid characters in dial string +CPBW
30 No network service +VTS, +COPS=?, +CLCK, +CCFC, +CCWA, +CUSD
32 Network not allowed – emergency calls only +COPS
40 Network personalization PIN required (Network
lock)
All GSM 07.07 commands (+CME ERROR: 40)